Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Ignition Switch on a Volkswagen Golf 7?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

To replace the ignition switch on a Volkswagen Golf 7, first loosen the screws at the back of the steering wheel to remove the airbag. After disconnecting the connectors, loosen the nut on the steering wheel shaft so that it can also be removed. Next, detach the plastic covers from the upper and lower parts of the steering column to access the ignition switch. Remove the switch from its housing after taking out any obstructing parts and bolts shown in the video. Once the old switch is removed, install the new one.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To remove the ignition switch from the Volkswagen Golf, you need to loosen the screws that secure the plastic covers around the steering column: once…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To remove the ignition switch from a Volkswagen Golf 5, you need to unclip the plastic covers located at the top and bottom of the steering column. N…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) How do you remove the ignition switch from a Volkswagen Golf Series 4? In this video, the procedure is explained: before removing the ignition switch…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos