Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Ignition Switch from a Volkswagen Golf Series 4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Checks and maintenance

How do you remove the ignition switch from a Volkswagen Golf Series 4? In this video, the procedure is explained: before removing the ignition switch, disconnect the battery power cables; unscrew the fastening screws of the side and lower cover of the steering wheel using a socket or screwdriver, then remove the screws present using a screwdriver. Once the plastics are removed, take out the fastening pin of the ignition switch. After extracting the lock, replace it with a new one. Reverse the assembly steps to reassemble.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) How to remove the radio from a Volkswagen Golf Mk5? Let's carefully see how to proceed with the removal. Using a plastic or metal lever, remove (leve…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) How to remove the front bumper of a Volkswagen Golf Mk5? Let’s see the disassembly. Lift the engine bonnet and secure it; using a socket wrench (batt…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) How do you remove the fuel pump from a Volkswagen Golf Mk5? First, disconnect the battery cables, then remove the rear seat cushions of the car. Use …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos