Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Your Car's Drive Belt

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Timing belt

The drive belt is one of the most important components of your car. It should be replaced every 50,000 miles to avoid potential breakages or unpleasant surprises at the worst moments. Lift the car, remove a wheel, and start disassembling the parts you encounter. It is crucial to have the right tools and prepare a numbered diagram to help identify the parts during reassembly. The replacement should be done safely, paying attention to any strange noises when starting the engine after replacing the part, as this indicates that the belt has not been fitted correctly.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

When to Replace the Timing Belt on a Volkswagen Golf 7
When to Replace the Timing Belt on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To drive the camshaft(s) at half speed and in perfect synchronisation with the crankshaft, a transmission is required, which can be achieved in vario…
V-Belt Replacement on Volkswagen Golf
V-Belt Replacement on Volkswagen Golf
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) Loosen the bolts on the front right wheel, lift the car with a jack (if you do not have a ramp) and remove them completely. Remove the wheel and unsc…
How to replace the alternator of a Volkswagen Golf?
How to replace the alternator of a Volkswagen Golf?
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) Replacing the alternator of a Volkswagen Golf requires some fundamental steps. First of all, make sure to disconnect the negative battery cable to av…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos