Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time in a Volkswagen Fox?

Model: Volkswagen Fox MK 2 - Years 2015-2021
Part: Clock

In this tutorial, you will learn how to set the time in a Volkswagen Fox, a very simple and quick operation to perform after a flat battery or when the clocks change. First, enter the cabin, then insert the key and turn on the instrument cluster. Next, press and hold the "0.0/SET" button located to the right of the dashboard, wait for the hour to start flashing, and adjust it using the same button. Similarly, you can switch to the minutes, adjust them, and save the setting.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the Volkswagen Fox?
How to reset the service on the Volkswagen Fox?
Volkswagen Fox (2015-2021 / MK 2) In this tutorial, you can see how to adjust the time on the Volkswagen Fox, an extremely simple and quick operation to perform, for example, after re…
How to set the time on a Volkswagen CrossFox
How to set the time on a Volkswagen CrossFox
Volkswagen Fox (2003-2011 / MK 1) In this very short video tutorial today we can see the entire operation necessary to change the time on our Volkswagen Crossfox, first generation mod…
How to Set the Clock on a Volkswagen Fox
How to Set the Clock on a Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) Below, we will discover the steps to adjust the clock on the display of the instrument cluster in the Volkswagen Fox. First, get into the vehicle and…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos