Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

Resetting the tyre warning light on a Volkswagen Golf is an extremely simple and quick operation, as shown in this tutorial. Before proceeding, ensure that the correct pressure is restored in each tyre according to the specifications in the manual.

Start by entering the cabin, then access the vehicle information menu by pressing the "CAR" button located to the right of the display. Next, navigate to the tyre pressure screen, select "SET", and confirm the reset.

To verify that the procedure was successful, simply restart the vehicle.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on the Volkswagen Golf
Resetting the Tyre Pressure Warning Light on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Briefly, here are the instructions needed to reset the tyre pressure warning light on the Volkswagen Golf; before performing the reset, ensure all fo…
How to Reset the Tyre Pressure Warning Light on the Volkswagen Golf
How to Reset the Tyre Pressure Warning Light on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Here are the instructions to reset the tyre pressure warning light on the Volkswagen Golf. Before recalibrating the TPMS sensors, ensure all four tyr…
Resetting the Tyre Pressure Warning Light on the Volkswagen Golf
Resetting the Tyre Pressure Warning Light on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's video will show you how to reset the tyre pressure warning light (TPMS) on the Volkswagen Golf; before performing the reset, ensure that all …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos