Do it yourself
Frequently asked questions about cars and motorcycles

How to Use Car Axle Stands

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

Car axle stands are essential metal tools that ensure the safety of those working under vehicles. Keeping a car elevated correctly can make the difference between a successful maintenance job and a tragic accident. It is crucial that the supports you use are constructed and tested to safely withstand the weight of the vehicle. Engage the handbrake to prevent the car from moving while raised; also place wheel chocks in front of and behind the wheels on the opposite side to the one being lifted. This additional safety measure prevents any accidental movement of the vehicle. Position the axle stands under a strong structural part of the chassis.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) There are three things to know about car headlinings: The first is to avoid using Bostik to glue the fabric, as it dampens the material and does not …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today we will explain how to use the automatic parking brake of the 2012 Volkswagen Golf 7 to prevent the vehicle from moving and make hill starts mu…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This video shows the steps to perform an engine oil change in a Volkswagen Golf 7. First, lift the car with a jack and ensure it is stable. Next, aft…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos