Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service on a Volkswagen Transporter van?

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Resetting the service on a Volkswagen Transporter van, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that you have completed all required scheduled maintenance tasks.

Start by entering the vehicle and inserting the key, but leave it in the initial position. Then, press the button located below the speedometer, turn on the instrument cluster simultaneously, and hold the button for about 5 seconds, or for as long as necessary for the interval to reset correctly.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Volkswagen Transporter (2003-2014 / T5, MK 5) In this tutorial, we will see how to reset the service light on a Volkswagen Transporter van, a very simple and quick operation to be carried out onl…
Volkswagen Transporter (2003-2014 / T5, MK 5) In this tutorial, you will learn how to reset the service light in a Volkswagen Transporter, a very simple and quick operation to perform only after …
Volkswagen Transporter (2003-2014 / T5, MK 5) In this tutorial, you will see how to reset the service on the Volkswagen Transporter van, a very simple and quick operation to perform only after co…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos