Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a VW Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Tail light bulb

Replacing the rear headlamp bulb on a Volkswagen Golf mk7 involves very simple steps that you can perform yourself. Start by opening the boot of the vehicle. Next, remove the protective cover and unscrew the internal support pin. After that, disconnect the connector and extract the headlamp from its housing. Complete the removal by lowering the clips of the light unit and extracting the bulb. To install the new bulb, reverse the steps. Once the headlamp is refitted, you can proceed to the left bulb if necessary.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Rear Headlamp Bulbs on VW Golf 5
How to Change Rear Headlamp Bulbs on VW Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Are the bulbs in the rear headlamp of your VW Golf 5 blown and need changing? Here's how to do it. Open the rear hatch of the boot. Locate the inspec…
Replacing the Rear Headlamp Bulb on Golf 6
Replacing the Rear Headlamp Bulb on Golf 6
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Need to replace the rear headlamp bulb? Let's look at replacing the bulbs in the rear headlamp of the Golf. Open the boot lid and remove the plastic …
Replacing the Rear Headlamp Bulb
Replacing the Rear Headlamp Bulb
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) If the bulb warning light illuminates on the instrument panel, it means one of the bulbs has blown; an inspection reveals that the blown bulb is the …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos