Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on the Volkswagen T-Cross?

Model: Volkswagen T Cross MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

Video tutorial

To reset the Service light on the Volkswagen T-Cross, turn on the ignition and press and hold the OK button located on the right side of the steering wheel. This will open a screen where you can navigate using the directional arrows next to the OK button.

Here, select the "Reset oil service" option and confirm your selection by pressing OK again when the confirmation message appears. You will need to perform the same operation with "Reset inspection" to reset all maintenance intervals.

The instrument cluster can be turned off at the end of the procedure.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Volkswagen T Cross (2019-2026 / MK 1) .. From the instrument cluster of the Volkswagen T-Cross, you can clear the Service light by activating the instrument cluster and holding down the OK button.. …
Volkswagen T Cross (2019-2026 / MK 1) .. reset the oil warning light on the Volkswagen T-Cross: turn on the ignition and then navigate the menu using the button on the right side of the steering.. …
Volkswagen T Cross (2019-2026 / MK 1) .. To reset the Service light on the Volkswagen T-Cross, turn on the ignition and press and hold the OK button located on the right side of the steering.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos