Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Sharan
    4. : How do you reset the AdBlue warning light on the Volkswagen Sharan?

Volkswagen Sharan - Video tutorial

Model: Volkswagen Sharan MK 2, 7N - Years 2010-2023
Part: Checks and maintenance
Operation: How do you reset the AdBlue warning light on the Volkswagen Sharan?

When the AdBlue warning light appears on the Volkswagen Sharan instrument panel, it means that the additional fluid inside the tank is almost completely depleted. Therefore, to turn off the warning light, you will need to top up the fluid. This can be done by opening the rear hatch and accessing the tank located at the bottom of the car: it will be accessible by opening the cap located on the left side of the trunk. Once the top-up has been completed, you can close the cap again and verify that the warning light reset has been successful.


Posted on 20 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Sharan 2010-2023 - How to unlock the trunk of the Volkswagen Sharan? Read Answer
    • Sharan 1995-2010 - Where is the tire repair kit located in the Volkswagen Sharan? Read Answer
    • Sharan 2010-2023 - Where is the jack of the Volkswagen Sharan located? Read Answer
    • Sharan 2010-2023 - How to remove the AdBlue warning light in the Volkswagen Sharan? Read Answer
    • Sharan 2010-2023 - What problems have been encountered with the Volkswagen Sharan AdBlue system? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos