Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel of a Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Door trim panel

Today's instructions will guide you on how to remove and replace the front door panel of a Volkswagen Golf. First, open the front door and start unscrewing the fixing screws located on the sides of the panel; then remove the plastic cover of the grab handle by unscrewing the additional screws underneath, as shown in the video. At this point, pry the sides of the panel to detach it, disconnecting the handle cable and the electric connector of the window switch to completely remove the door panel!

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembling the Front Door Panel of the Volkswagen Golf
Disassembling the Front Door Panel of the Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The instructions below will allow you to disassemble and remove the front door panel of the Volkswagen Golf, GTI version. First, open the front door …
Removing the Front Door Panel of the Volkswagen Golf
Removing the Front Door Panel of the Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Here are the main instructions on how to remove and replace the front door panel of the Volkswagen Golf, GTI version. First, open the front door of y…
Removing the Right Front Door Panel of a Volkswagen Golf Mk5
Removing the Right Front Door Panel of a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Perform the removal of the right front door panel of a Volkswagen Golf Mk5. Disconnect the battery terminals in the engine bay. Use a screwdriver to …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos