Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Battery replacement for the Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, 6R, Polo 5, MK 5, Polo V - Years 2009-2017
Part: Battery
Operation: Battery replacement for the Volkswagen Polo

Today's brief instructions will show us how to disassemble and replace the battery of the Volkswagen Polo. First, let's open the vehicle's engine hood and start by disconnecting both battery terminals (positive and negative) by unscrewing the securing nuts. Then, we unscrew the bracket screw located at the bottom of the battery, using a ratchet wrench with an extension, as shown in the video. At this point, we remove and replace the battery with a new one of the correct type and with the same amperage. Finally, we reassemble the new battery!


Posted on 10 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How many amps is the battery of the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How many amps must the battery of a Polo 1.4 diesel with positive pole on the left be? Read Answer
    • Polo 2009-2017 - How many Ah must be the battery for the VW Polo1.2 petrol? Read Answer
    • Polo 2001-2009 - How many amps should the battery have for the VW Polo 1.4 petrol? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos