Do it yourself
| ||||
|
Volkswagen Caddy - Video tutorial
Model: Volkswagen Caddy
SB
- Years 2020-2024 In case we notice that one of the rear light bulbs of the Volkswagen Caddy has burnt out, it is good practice to replace it as soon as possible. To do this, we open the rear door and position ourselves in front of the light that contains the bulb to be replaced. Using a flat-blade screwdriver, we remove the plastic cover between the light and the rubber seal. We will discover two screws that need to be removed. By applying force to the body of the light and pulling it towards us, we remove it. We disconnect the electrical connector. We unscrew the four screws that secure the plate where the bulbs are housed, allowing us to replace the burnt-out bulb. We reassemble the light and position it back into its place, proceeding in reverse order with the steps.
Posted on 15 February 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.042
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |