Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the VW Gol Trend

Model: Volkswagen Gol G2, G4, G3 - Years 1994-2015
Part: Car stereo

Today, you will learn the steps to remove the radio from the Volkswagen Gol. To remove the radio, insert a flat, serrated tool into the left slot to help you remove the stereo. After hearing the first click, insert the same tool into the right slot and then pull the radio outwards. Once the radio is extracted, to remove it completely, you will need to disconnect the connector and the antenna wire. If you only want to view the serial number or read the unlock pin, you can find it on the right side of the radio.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rearview Mirror from a Volkswagen Gol Trend
How to Remove the Rearview Mirror from a Volkswagen Gol Trend
Volkswagen Gol (2008-2023 / 5U, G5) To remove the rearview mirror from the Volkswagen Gol Trend, start by prying off the plastic cover with a flat screwdriver. Detach the cap, and if it…
How to reset the service light on the VW Gol Trend
How to reset the service light on the VW Gol Trend
Volkswagen Gol (2008-2023 / 5U, G5) The service light reset, related to the car service, of the Volkswagen Gol is a procedure to be carried out after completing the service. To perform …
Location and Diagram of the Fuse Boxes for the Volkswagen Gol 2008/2021
Location and Diagram of the Fuse Boxes for the Volkswagen Gol 2008/2021
Volkswagen Gol (2008-2023 / 5U, G5) Let's see where the fuse and relay boxes for the Volkswagen Gol are located: the main box is in the engine compartment, on the left side, near the ba…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos