Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Volkswagen Passat?

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

The tyre pressure warning light on the Volkswagen Passat can be reset by first inflating the tyres to the recommended pressure value: this value is indicated on the sticker affixed to the driver’s door pillar. Once the tyres are inflated, enter the cabin and turn on the ignition: then open the glove compartment located on the passenger side, locating the SET button inside.

Press and hold it for a few seconds, and you will notice that the tyre pressure warning light will completely disappear.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure light on the Volkswagen Passat?
How to reset the tyre pressure light on the Volkswagen Passat?
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) On the Volkswagen Passat, to reset the tyre pressure light, first inflate the tyres until they reach their optimal pressure value: this value is indi…
Resetting the Tyre Pressure Warning Light on the Volkswagen Passat
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) The information in this guide will show you the procedure to reset the tyre pressure monitoring system (TPMS) warning light on the Volkswagen Passat;…
How to Reset the Tyre Pressure Warning Light on a Volkswagen Passat?
How to Reset the Tyre Pressure Warning Light on a Volkswagen Passat?
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) Resetting the tyre pressure warning light on a Volkswagen Passat involves first inflating the tyres until they reach their optimal pressure value: th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos