Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure light on the Volkswagen Passat?

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Tire pressure warning light

On the Volkswagen Passat, to reset the tyre pressure light, first inflate the tyres until they reach their optimal pressure value: this value is indicated on the sticker attached to the driver's door pillar. Once all tyres are correctly inflated, proceed by opening the glove compartment on the passenger side: press and hold the SET button located inside, after turning on the ignition. After a few seconds with the button pressed, you will notice that the tyre pressure light resets.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Volkswagen Passat?
How to reset the tyre pressure warning light on the Volkswagen Passat?
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) The tyre pressure warning light on the Volkswagen Passat can be reset by first inflating the tyres to the recommended pressure value: this value is i…
Resetting the Tyre Pressure Warning Light on the Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) The information in this guide will show you the procedure to reset the tyre pressure monitoring system (TPMS) warning light on the Volkswagen Passat;…
How to Reset the Tyre Pressure Warning Light on a Volkswagen Passat?
How to Reset the Tyre Pressure Warning Light on a Volkswagen Passat?
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Resetting the tyre pressure warning light on a Volkswagen Passat involves first inflating the tyres until they reach their optimal pressure value: th…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos