Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Warning Light on the Volkswagen Passat

Model: Volkswagen Passat B7 - Years: 2010, 2011, 2012, 2013, 2014
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Volkswagen Passat, first inflate the tyres to the correct pressure value, which is indicated on the sticker affixed to the driver's door pillar. Once the tyres are correctly inflated, turn on the ignition using the key. Then, open the glove compartment and locate the SET button at the top left.

Press and hold this button until the warning light turns off completely.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2014-2023 / MK 8, 3G, B8) To reset the tyre pressure warning light on the Volkswagen Passat, turn on the ignition by inserting the key. Before doing this, ensure the tyres are…
Volkswagen Passat (2010-2014 / B7) It will be possible to completely eliminate the tire pressure warning light on the Volkswagen Passat by inflating the tires to the optimal pressure v…
Volkswagen Passat (2010-2014 / B7) To reset the service light on a Volkswagen Passat, turn on the ignition by turning the key in the ignition switch. Once the dashboard is on, navigate…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos