Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Flange on the Volkswagen Golf

Model: Volkswagen Golf Golf 5, Golf V, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Accessory kit

See other generations:
Video tutorial

Release and lift the bonnet, remove the upper engine cover, and unscrew the cap of the coolant reservoir to relieve pressure in the system. Now remove the hoses indicated in the video and prepare containers underneath for the fluid that will spill out. To remove them, detach the clips that secure them to the inlets.

Now, remove the bolts indicated in the video, and this will allow you to remove the flange in question. Carry out the necessary replacements to then reassemble everything by following the steps in reverse.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) To replace the window seal of the Volkswagen Golf, use a tool like a screwdriver to pry the piece away from its housing: simply lift the seal from on…
Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) Today's main instructions will show you how to remove and replace the cylinder head gasket on a Volkswagen Golf 1.6. First, open the bonnet of the ve…
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) To replace the cylinder head gasket on a Volkswagen Golf 3, open the bonnet to access the components inside the engine bay: before removing the engin…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos