Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Volkswagen Polo?

Model: Volkswagen Polo 6N, Polo III, MK III, Polo 3, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Service warning light

See other generations:
Video tutorial

The procedure to reset the Service light on the Volkswagen Polo involves pressing the button located at the bottom centre of the speedometer while the instrument cluster is off: continue holding this button, then insert the key into the ignition and turn it to power on the instrument cluster.

You must keep the button pressed for a few seconds after switching on, then release it to notice that the light has been reset; at the end of the procedure, you can switch off the cluster again.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2017-2025 / Polo 6, MK 6, MK VI, AW1, Polo VI) To reset the Service light on a Volkswagen Polo, you need to turn on the instrument cluster so you can navigate through the menu options on the onboa…
Volkswagen Polo (2017-2025 / Polo 6, MK 6, MK VI, AW1, Polo VI) To reset the Service light in a Volkswagen Polo, press the button located just below the instrument cluster on the left side while inserting the key …
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) To reset the Service light on the Volkswagen Polo, turn on the ignition and then press the button to the left of the instrument cluster four times: t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos