Do it yourself
Frequently asked questions about cars and motorcycles

How do you install the rear camera of the Volkswagen Golf?

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Checks and maintenance

In order to install the rear camera of the Volkswagen Golf, you need to loosen the screws that secure the inner panel of the tailgate in place: once these screws have been loosened, it will be possible to completely detach this panel in order to access the underlying components. The rear camera can now be inserted into its housing, passing the cables into the interior of the car; hiding them under the door sills, it will be possible to bring the cables into the dashboard and connect them behind the radio, thus verifying that the device functions correctly.

Posted on 3 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To install the reversing camera on the Volkswagen Golf 6, connect the camera wiring to the car radio, routing all wires under the seals or beneath th…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this brief guide, you will see the steps to install the reversing camera for parking manoeuvres on the Volkswagen Golf. First, obtain the suitable…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's main instructions will show us the process of installing the rear parking camera on the Volkswagen Golf. First, we open the rear hatch and be…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos