Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the gas tank of the VW Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009

When the fuel flap of a Volkswagen Polo, mk4 model is stuck, it is necessary to unlock it from the inside. To perform this operation, it is necessary to open the trunk and remove the right side carpet. Using a flat tip screwdriver, push outwards the white tab, as shown in the video tutorial, and open the fuel flap. To open the cap and refuel, simply turn it counterclockwise. If the cap is stuck, it may be necessary to spray some WD40 oil spray and wait a few seconds.

Posted on 10 June 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to open the fuel tank door of the Volkswagen Polo
How to open the fuel tank door of the Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) Below we will see the instructions that will allow us to open the fuel tank flap of the Volkswagen Polo, in simple steps. First of all, we get on boa…
How to Open the Fuel Filler Flap on a Volkswagen Polo 9N1?
How to Open the Fuel Filler Flap on a Volkswagen Polo 9N1?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To manually open the fuel filler flap on a stuck Volkswagen Polo 9N1, lift the rear bonnet and then raise the side carpet in the boot, on the side wh…
How to open the fuel tank door of the VW Polo
How to open the fuel tank door of the VW Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Today we will explain how to open the fuel door of a Volkswagen Polo car. To perform this operation, it is necessary for the vehicle to be unlocked a…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos