Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on a Volkswagen Passat?

Model: Volkswagen Passat B7 - Years: 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a Volkswagen Passat, press and hold the 0.0/SET button located on the right side of the instrument cluster while it is off: continue holding the button, then insert the ignition key into the lock and proceed while keeping the button pressed.

You can release the button when the light disappears completely.

At this point, you can return to the initial screen to verify that the reset has been completed successfully.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Volkswagen Passat?
How to reset the "Service" light on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To reset the "Service" light on a Volkswagen Passat, turn on the ignition without starting the engine. Use the controls on the steering wheel to ente…
How to Reset the Service Light on a Volkswagen Passat
How to Reset the Service Light on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) If the service light appears on the dashboard of your Volkswagen Passat (2010-2014) even after servicing the vehicle, do not worry as you can manuall…
How to Reset the "Service" Light on a Volkswagen Passat
How to Reset the "Service" Light on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before you can begin, sit in the driver's seat of your Volkswagen Passat. Start by pressing and holding the spanner-shaped button located above the i…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos