Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulb on a Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

To replace the indicator bulb on a Volkswagen Golf, use a tool to lever off the glass from the inside of its housing. Once the glass is removed, you can loosen the screws underneath, freeing the cover from its position.

After removing the cover, disconnect the screws of the light unit, open it, and pull out the bulb inside. At this point, you can insert the new bulb, reposition the cover, and secure it in place.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Replace the Indicator Bulb in a Volkswagen Golf 7
How to Replace the Indicator Bulb in a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, you will see the steps to disassemble and replace the indicator bulb in the wing mirror of a seventh-generation Volkswagen Golf. First…
Replacing the Rear-View Mirror Bulb on a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this video, see how to remove the bulb from the external rear-view mirror on a sixth-generation Volkswagen Golf by following these simple steps. F…
Replacing the Wing Mirror Glass on a Volkswagen Golf 7
Replacing the Wing Mirror Glass on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this short video, see how to remove and replace the outer wing mirror glass on the seventh-generation Volkswagen Golf, as well as most models from…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos