Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : Rear light stop bulb replacement

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf V, MK 5, Golf 5 - Years 2003-2008
Part: Rear light bulb
Operation: Rear light stop bulb replacement

To replace the lamp you only need a screwdriver and a ratchet wrench. To replace the bulb it is necessary to disassemble the entire lighting assembly. The screws are accessible under the soundproof cover in the trunk near the headlight. After removing the two screws with the ratchet wrench, remove the light by first removing the connector. Once the light has been removed, remove the four screws to access the lamp holders. Carefully remove the cover and replace the defective bulb by pressing it lightly and turning it counterclockwise until it releases. Put the new bulb back using one with the same characteristics. Refit the screws of the lamp holders and reposition the lamp unit in the housing by connecting the relative connector. Tighten the screws carefully.


Posted on 25 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Golf 2008-2012 - Why does the reverse light on the Volkswagen Golf not work? Read Answer
    • Golf 1997-2003 - Where is the reverse switch located in the Volkswagen Golf 4? Read Answer
    • Golf 2008-2012 - Why does the reverse light of the Volkswagen Golf 6 not come on? Read Answer
    • Golf 2008-2012 - Which position light bulb is fitted to the Volkswagen Golf 6? Read Answer
    • Golf 2008-2012 - Where is the reversing bulb on Volkswagen Golf 6? Read Answer
    • Golf 2008-2012 - Where are the reversing bulbs of the VW Golf 6 located? Read Answer

How to set the time on the Peugeot 308

If we need to change the time on this car we can follow the instructions given in this video tutorial and read the instructions below. First of all, access the driver's seat and turn on the ignition. On the right multifunction lever there are the controls with the arrows to scroll the various menu functions and scroll the various functions up to "display adjust", after which press the button behind the lever to change the time, once set the new value press again the key with the arrow indication and modify the minutes in this way the work will be completed.

Watch the video!


by ScegliAuto

More videos