Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear light bulbs of the Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Tail light bulb

The instructions in this guide will show us how to disassemble and replace the bulbs of the rear light of the Volkswagen Golf. First, let's open the rear hatch of the trunk and start removing the right or left side trim; then we remove the bulb holder from the ceiling light to access all the stop light bulbs, as shown in the video. Once we have replaced any faulty bulbs with new ones, we will reassemble the bulb holder on the rear light; then we check the proper functioning of all the stop lights!

Posted on 28 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the bulbs and rear light of the Volkswagen Golf
Replacement of the bulbs and rear light of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below we will see the information that will allow us to disassemble and replace the rear taillight and its bulbs of the Volkswagen Golf. First, we op…
How to Replace the Rear Light Bulbs on a Volkswagen Golf
How to Replace the Rear Light Bulbs on a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below, you will find instructions on how to remove and replace the rear light and its bulbs on a Volkswagen Golf. First, open the rear hatch and star…
How to Remove the Rear Light Bulbs on a Volkswagen Golf 4
How to Remove the Rear Light Bulbs on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Are the rear light bulbs blown on a VW Golf 4? Let’s see how to remove the bulbs from the light. Open the boot of the Golf, remove the cover cloth, a…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos