Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the car radio of the Volkswagen Golf - Jetta

Model: Volkswagen Golf Golf III, MK 3, Golf 3 - Years 1991-1997
Part: Car stereo

The instructions provided in this guide will show us how to disassemble and replace the stock radio of the Volkswagen Golf, as well as the Jetta. First, we get into the car and start inserting the appropriate extraction tools into the side holes of the radio; push and pull to remove the original radio, then disconnect all electrical connectors on the back, as shown in the video. Now install the new stock or compatible radio, redoing the wiring, applying the reverse procedure!

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Enter the Radio Code for the Volkswagen Golf
How to Enter the Radio Code for the Volkswagen Golf
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) .. radio of the Volkswagen Golf, as well as the Jetta. First, get inside the vehicle and start removing the radio. You'll find a label at the top with.. …
How to Remove the Rear Tailgate Handle on the Volkswagen Golf - Jetta
How to Remove the Rear Tailgate Handle on the Volkswagen Golf - Jetta
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) .. handle on the Volkswagen Golf, as well as the Jetta. First, open the boot tailgate and start by removing the plastic panel or trim; then unscrew the.. …
How to Remove the Rear Seats from a Volkswagen Golf - Jetta
How to Remove the Rear Seats from a Volkswagen Golf - Jetta
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) .. seats from a Volkswagen Golf, as well as from a Jetta, following the steps outlined below. First, open the rear doors and begin lifting the rear bench.. …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos