Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volvo V50?

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Service warning light

The Service light that is displayed on the instrument panel of the Volvo V50 can be reset by holding down the button located on the right side of the instrument panel: the button must be held down while the instrument panel is turned off. Afterwards, you will need to insert the ignition key and turn on the instrument panel, continuing to hold down the corresponding button: a flashing "i" will appear in the middle of the screen. After the icon has flashed three times, you can release the button, turn off the instrument panel; after it is turned on again, you can verify that the Service light has been reset.

Posted on 10 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo V50
How to Reset the Service Light on a Volvo V50
Volvo V50 (2004-2012 / MK 1) In this new guide for all of you who own a Volvo V50, you will learn how to manually reset the service light on the instrument cluster. First, reach …
How do you reset the Service light on the Volvo V50?
How do you reset the Service light on the Volvo V50?
Volvo V50 (2004-2012 / MK 1) In order to reset the Service light of the Volvo V50, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…
How to reset the service light on the Volvo V50
How to reset the service light on the Volvo V50
Volvo V50 (2004-2012 / MK 1) The instructions and steps provided in this guide will allow us to reset the service maintenance light of the Volvo V50. First of all, we get into th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos