Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo V50?

Model: Volvo V50 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

Video tutorial

To reset the Service light on a Volvo V50, press and hold the TRIP button located on the lower side of the instrument cluster while it is off. While holding the button, insert the ignition key and turn it to position two. This will power up the cluster, and you must continue to hold the button until a flashing 'i' appears on the display.

At this point, you can release the button, noting that the 'i' will disappear from the display and the Service light will be correctly reset.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volvo V50?
How to Reset the Service Light on a Volvo V50?
Volvo V50 (2004-2012 / MK 1) To reset the Service light on a Volvo V50, press and hold the button located on the right side of the instrument panel: keep the button pressed while…
How to reset the service light on a Volvo V50
How to reset the service light on a Volvo V50
Volvo V50 (2004-2012 / MK 1) .. In this short guide, discover how to reset the service light on a Volvo V50 in simple steps. First, get inside the cabin and start.. …
How do you reset the Service light on the Volvo V50?
How do you reset the Service light on the Volvo V50?
Volvo V50 (2004-2012 / MK 1) In order to reset the Service light of the Volvo V50, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos