Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuse of the power window motor of the 2019 Volvo Trucks

Model: Volvo Volvo Various
Part: Fuse box

Today we will explain how to replace the fuse of the right window motor of the 2019 Volvo Trucks. First of all, we get on board the vehicle and immediately remove the upper dashboard where the fuse box is located. With the help of the diagram above, we identify the fuse to be replaced. The fuse related to the right window motor is labeled F13 with 20 Amps. To replace it, we must therefore use pliers to remove it and insert the new one with the same amperage. If the problem persists, it is necessary to replace the motor.

Posted on 8 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the battery relay of the Volvo located?
Where is the battery relay of the Volvo located?
Volvo Volvo Various Today we will explain how to replace the maxi fuse or relay of the battery of a Volvo D13 model if necessary. The maxi fuse in question is located in…
Where is the fuse box of the Volvo 64 located?
Where is the fuse box of the Volvo 64 located?
Volvo Volvo Various The Volvo 64 has two fuse boxes inside. The first fuse box is located inside the front hood, near the vehicle's battery. The second fuse box is locat…
Where are the fuses located in the Volvo VNL?
Where are the fuses located in the Volvo VNL?
Volvo Volvo Various Any fuse of the Volvo VNL is located inside the only fuse box installed on the vehicle: on this type of vehicle, the box can be found inside the cabi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos