Do it yourself
Frequently asked questions about cars and motorcycles

How to Fix the Non-Working Windows on the Citroen Berlingo

Model: Citroen Berlingo - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Power window motor

See other generations:
Video tutorial

This video shows the issue with this Citroen Berlingo where the windows go up but do not come down, and vice versa. Eventually, they stopped working altogether.

The cause was water ingress into the mechanism or electrical contacts, likely in the window motor connector or the buttons. The solution shown was to remove the door panel, inspect the connector and window motor, and thoroughly clean any oxidised or dirty contacts due to water with electrical contact spray.

Protect with anti-moisture spray or dielectric grease. In other cases, the window motor or mechanical regulator (the mechanical guide) may also be damaged; however, moisture is the most common cause in Berlingo and Partner models.


Posted on 20 November 2026 by ScegliAuto


Related tutorials

Citroen Berlingo (2008-2018 / MK 2) The reset of the Citroen Berlingo is a simple and quick operation that can be done independently after performing the car service operations. To rese…
Citroen Berlingo (2008-2018 / MK 2) This video shows how to resolve a vibrating steering wheel on a Citroen Berlingo. The YouTuber demonstrates an empirical method to fix the issue, whi…
Citroen Berlingo (2008-2018 / MK 2) In this video we can see how to remedy the problem of the stiff gear lever on the Citroen Berlingo. The vehicle must be lifted in order to check the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos