Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance (service) warning of the Volvo S60

Model: Volvo S60 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

In this brief and simple guide, we will see the instructions that will allow us to reset the regular maintenance warning (service) of the Volvo S60. First, we get in the car and start pressing and holding the reset button located at the bottom left of the dashboard, then turning on the instrument cluster; now we wait for the service light to blink three times on the dashboard, until it completely resets, as shown in the video.

At this point, we release the button and turn off the instrument cluster, then start the engine and check the actual reset!


Posted on 15 January 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Volvo S60?
How to reset the service light on the Volvo S60?
Volvo S60 (2000-2009 / MK 1) In this tutorial we can see how to reset the service in the Volvo S60, an extremely simple and quick operation, to be carried out only after completi…
Reset the Service Light on the Volvo S60
Reset the Service Light on the Volvo S60
Volvo S60 (2010-2018 / MK 2) Here are the instructions to reset the service light for routine maintenance on the Volvo S60. First, get inside the vehicle and turn on the ignition…
How to reset the maintenance light on the 2023 Volvo S60
How to reset the maintenance light on the 2023 Volvo S60
Volvo S60 (2019-2026 / MK 3) If you own a 2023 Volvo S60 and are wondering how to manually reset the maintenance light, then all you have to do is read the following guide. First…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos