Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Instrument Cluster Lights on Volvo S60

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Instrument cluster

To start, remove the trim around the instrument cluster using a plastic pry tool. This will give you access to the T25 Torx screws that secure the cluster on the sides. Remove these screws, pull the cluster out of its housing, and disconnect the connector. To replace the affected bulb, access it from the back of the cluster (the video shows the function of each light). The video also shows replacing the original bulbs with LED ones, so see if you prefer the new version. To reassemble everything, simply reverse the steps until you have reinstalled the trim around the cluster.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses Located on the Volvo S60?
Where Are the Fuses Located on the Volvo S60?
Volvo S60 (2019-2026 / MK 3) The fuses on the Volvo S60 are located inside dedicated fuse boxes installed on the vehicle: there are three of them in this type of car. The first i…
Removing the Front Headlight of the Volvo S60
Removing the Front Headlight of the Volvo S60
Volvo S60 (2010-2018 / MK 2) This guide shows you how to remove and replace the front headlight of the Volvo S60, including replacing the low beam bulb. First, open the hood of y…
Guide to Replacing the Timing Belt on the Volvo S60
Guide to Replacing the Timing Belt on the Volvo S60
Volvo S60 (2010-2018 / MK 2) Today's guide will show you the procedure to remove and replace the timing belt on the Volvo S60. First, open the hood of the vehicle and start by re…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos