Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo XC70 (and Other Models)

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

In this video, we will see how to reset the service light on a Volvo XC70: the same procedure applies to many other models of the brand, which use the same simple combination, namely S60, S80, S70, S40, XC90. For all these models, start by closing all four doors, the rear boot, and the front bonnet.

Press and hold the reset button located on the left side of the speedometer, then turn on the ignition without starting the engine.

The display will start flashing the message "SRL" (which in the video is covered by the hand of the YouTuber); at this point, release the button and the operation is complete.


Posted on 6 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volvo XC70?
How to Reset the Service Light on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) On the Volvo XC70, the procedure to reset the Service light involves pressing the button located on the right side of the instrument cluster: while h…
Reset of the service light for the Volvo XC70.
Reset of the service light for the Volvo XC70.
Volvo Xc70 (2007-2016 / MK 3) Below we will see the instructions on how to reset the service light for the regular maintenance of the engine oil change for the Volvo XC70. First, …
How to Reset the Service Light on a Volvo XC70?
How to Reset the Service Light on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To reset the service light on a Volvo XC70, press and hold the button located on the right side of the instrument cluster. While continuing to hold t…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos