Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Volvo XC60?

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Battery

Video tutorial
Detailed instructions - In this tutorial, we will see how to replace the battery in the Volvo XC60, a very simple and quick operation. First, ensure that the instrument cluster is off for safety, then open the trunk, lift the floor panel, and remove both the spare tire and its base. Next, loosen the terminal fastening nuts with a 10mm wrench, disconnect them starting with the negative terminal, unclip both the strap and the upper bracket, and remove the two lower bolts. At this point, simply extract the old battery, place the new one, and reassemble everything by following the reverse procedure.

Posted on 4 June 2026 by ScegliAuto


Related tutorials

Battery replacement for the Volvo XC60
Battery replacement for the Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) These brief and simple steps will show us how to disassemble and replace the battery of the Volvo XC60. First, let's open the rear hatch of the trunk…
How to replace the battery in the Volvo XC60?
How to replace the battery in the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) .. In this tutorial, we can see how to replace the battery in the Volvo XC60, an extremely simple and quick operation. First of all,.. …
How to replace the remote battery for the Volvo XC60?
How to replace the remote battery for the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this tutorial, you can see how to replace the remote battery for the Volvo XC60, a very simple and quick operation. For this, you will need a smal…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Citroën DS4?

The tyre pressure warning light on the Citroën DS4 can be reset by inflating the tyres until they reach the corresponding pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all tyres are at this value, turn on the ignition by inserting the key into the ignition switch; this should make the warning light disappear from the dashboard. If it does not reset, start the engine and drive to allow the sensors to read the new values.

Watch the video!


by ScegliAuto

More videos