Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Gas Struts on Volvo V50

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Hydraulic pistons

Open the tailgate and support it with a long hydraulic jack, as it will have no support shortly. Using a flat screwdriver, detach the retaining ring that connects the strut to the gas spring on the bonnet. Similarly, detach the ring that connects the gas spring to the body. At this point, you can remove the gas strut, ensuring that your hydraulic jack is well positioned. Obviously, repeat the procedure on the other spring. While they are out, clean the mounting seats of the struts. Position the gas spring, ensuring the retaining ring clicks into place to indicate correct insertion.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulbs on a Volvo V50
Replacing the Headlight Bulbs on a Volvo V50
Volvo V50 (2004-2012 / MK 1) Replace the front headlight bulbs on a Volvo V50. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it wit…
Guide to Replacing the Timing Belt on the Volvo V50 2.0L
Guide to Replacing the Timing Belt on the Volvo V50 2.0L
Volvo V50 (2004-2012 / MK 1) This guide will show you how to remove and replace the timing belt on the Volvo V50 2.0L, as well as the V70. First, open the bonnet and begin by rem…
How to Replace the Front Headlamp Bulb of the Volvo V50
How to Replace the Front Headlamp Bulb of the Volvo V50
Volvo V50 (2004-2012 / MK 1) In this guide, you will learn how to replace the front headlamp bulb of your Volvo V50. Before starting, ensure the car is turned off for safety reas…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos