Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulbs on a Volvo V50

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Headlight bulb

Replace the front headlight bulbs on a Volvo V50. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop. Locate the pin that secures the headlight and remove it (located on the side of the headlight). Remove the headlight from the bumper; pull out the bulb holders from the headlight and extract the damaged bulbs using a screwdriver (if they do not come out easily). Fit the new bulbs (always of the correct type and size) and insert the headlight back into the bumper housing. Refit all previously removed parts.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of the Volvo V50
How to remove the front bumper of the Volvo V50
Volvo V50 (2004-2012 / MK 1) In a few simple steps, we will see how to disassemble and replace the front bumper of the Volvo V50. First, open the hood of the car and start unscre…
How to replace the front headlights in the Volvo V50?
How to replace the front headlights in the Volvo V50?
Volvo V50 (2004-2012 / MK 1) Replacing the front headlights in the Volvo V50, as we can see in this tutorial, is an extremely simple and fast operation. First of all, make sure t…
How to Remove the Rear Light on a Volvo V50?
How to Remove the Rear Light on a Volvo V50?
Volvo V50 (2004-2012 / MK 1) To remove the rear light on a Volvo V50, open the tailgate of the boot and remove the side cover of the wall corresponding to the light. By removing …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos