Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V50
    4. : Central tunnel removal on Volvo V50-V40

Volvo V50 - Video tutorial

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Dashboard
Operation: Central tunnel removal on Volvo V50-V40

Although we show you a Volvo V50 as an example, the procedure is the same for the V40. Using a plastic wedge, remove the outer frame of the on-board computer by prying it into the slots. At this point unscrew the screws surrounding the screen and extract it, remembering to disconnect the two connectors associated with it. If you want to remove the gear knob just press it lightly and rotate it, while the headset is simply extracted from the base (again with the plastic wedge). To disassemble the rear part of the central tunnel, open the drawer, remove the plate with the connector connected and unscrew the screws below.


Posted on 16 January 2024 by ScegliAuto



How to remove the central trim panel on Volvo V50
Volvo V50 (2004-2012 / MK 1) Let's see how to disassemble and remove the central trim panel on Volvo V50. We bring the gear knob vertically, then, with a plastic lever we remove
How to remove the door panel in your Volvo V50
Volvo V50 (2004-2012 / MK 1) This video will show you how to remove the door panel in your Volvo V50 quickly and easily. First of all, with the help of a removal lever, you will
How to disassemble the original Volvo V50 car stereo
Volvo V50 (2004-2012 / MK 1) How to disassemble the original Volvo V50 car stereo? Let's see: with a plastic lever remove the frame of the car radio (under the air vents) and tha

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos