Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V40
    4. : How to reset the Volvo V40 service light

Volvo V40 - Video tutorial

Model: Volvo V40 MK 2 - Years 2012-2019
Part: -board computer
Operation: How to reset the Volvo V40 service light

Below we will find out how to manually reset the 2019 Volvo V40 service warning light correctly. First you have to insert the smart key, press the "Start/Stop" button and hold down the "OK" button located in the end of the left lever so as to start the instrument panel. At this point continue to hold down the "OK" button until you hear a short beep signaling that the reset has taken place. Finally, switch the ignition off and on again to see for yourself that the warning light has not come on.


Posted on 4 December 2022 by ScegliAuto



How do you reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) The procedure to reset the Service light on the Volvo V40 is done by turning on the instrument panel by turning the key in the ignition and then hold
How do you reset the service light in the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In the video presented here, it is shown and verbally explained, how to reset the service light of a Volvo V40. First of all, once inside the car, th
How do you reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, the Service light can be reset by turning on the instrument panel by turning the key, and then holding down the OK button located a

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos