Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volvo V40?

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

This video shows and verbally explains how to reset the service light on a Volvo V40. First, once inside the vehicle, use the electronic key to turn on the ignition by inserting it into the designated slot. Next, access the Service option on the display, and when prompted to Reset Service, press and hold the button on the key and the OK button at the end of the left stalk.

Once confirmed that the operation was successful, press the OK button again before exiting the menu.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to reset the Service light on a Volvo V40?
How to reset the Service light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on a Volvo V40, turn on the instrument cluster by turning the key, then press and hold the OK button located at the end of…
How to Reset the Maintenance Light on a Volvo V40
How to Reset the Maintenance Light on a Volvo V40
Volvo V40 (2012-2019 / MK 2) In this guide for your Volvo V40 Mk2, discover how to manually reset the maintenance (or service) light that illuminates on your car's instrument pan…
How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, insert the key into the ignition switch, but do not turn on the instrument panel. Then, press and hold t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos