Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S80
    4. : How to replace the rear shock absorbers of the Volvo S80.

Volvo S80 - Video tutorial

Model: Volvo S80 MK 1 - Years 1999-2006
Part: Shock absorbers
Operation: How to replace the rear shock absorbers of the Volvo S80.

In this short and simple guide, we will see the process that will allow us to disassemble and replace the rear shock absorbers of the Volvo S80. First of all, we open the rear door of our car and start removing the fabric covering, in order to unscrew the nuts that we find on the upper part of the suspensions; then we lift the car and disconnect the shock absorbers from the lower part, unscrewing all the pins, as shown in the video. At this point, we install the new shock absorbers, as well as the original ones, fixing them correctly on the upper and lower parts!


Posted on 22 August 2023 by ScegliAuto



How do I replace the rear light on the Volvo S80?
Volvo S80 (2006-2016 / MK 2) In order to replace the rear light on the Volvo S80, you need to open the tailgate and loosen the knobs that allow you to lower the internal covers,
Where is the fuse box on the Volvo S80
Volvo S80 (2006-2016 / MK 2) In our new mini guide dedicated to your second series Volvo S80, we're going to find out where the box containing all the various fuses is located. T
Tricks for adjusting the locking height of the handbrake.
Volvo S80 (1998-2006 / ) First of all, lift the car at the rear and remove the right rear wheel. We put the disassembled rubber under the wheel axle and lower the jack to rem

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos