Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on a Volvo C30.

Model: Volvo C30 MK 1 - Years 2006-2013
Part: Service warning light

After changing the engine oil in our Volvo C30 (2006-2012), it will also be necessary to reset the corresponding warning light. In this very short video guide, we are shown how to perform this operation in a few simple steps. First, we turn the key to the first position, then we press and hold the "TRIP" button located on the speedometer, and then turn the key to the second position. After doing this, we continue to hold down the "TRIP" button until the orange "i" warning light starts and then stops flashing. Finally, we restart the vehicle to verify the correct reset.

Posted on 1 February 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Volvo C30?
How do you reset the Service light on the Volvo C30?
Volvo C30 (2006-2013 / MK 1) The procedure to reset the Service light on the Volvo C30 involves holding down the TRIP button located in the center of the instrument panel: while …
How do you reset the Service light on the Volvo C30?
How do you reset the Service light on the Volvo C30?
Volvo C30 (2006-2013 / MK 1) The operation of resetting the Service light on the Volvo C30 is carried out by holding down the TRIP button located in the central part of the instr…
How to reset the service light on the Volvo C30?
How to reset the service light on the Volvo C30?
Volvo C30 (2006-2013 / MK 1) In this tutorial we can see how to reset the service in the Volvo C30, an extremely simple and quick operation, to be carried out only once all sched…

Other guides you may be interested in

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos