Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volvo
  4. :
  5. C30
  6. : How do you reset the Service light on the Volvo C30?

Volvo C30 - Video tutorial

Model: Volvo C30 MK 1 - Years 2006-2013
Part: Checks and maintenance
Operation: How do you reset the Service light on the Volvo C30?

The procedure to reset the Service light on the Volvo C30 is done by pressing and holding the button located on the right side of the instrument panel while the panel is turned off. While continuing to hold down the button, you can insert the ignition key into the ignition switch and then turn it to turn on the instrument panel. You must then continue to hold down the button until an audible signal is played: at that point, you can release the button, noting that the Service light has been reset and you can turn off the instrument panel.


Posted on 20 March 2024 by ScegliAuto



How do you reset the Service light on the Volvo C30?
Volvo C30 (2006-2013 / MK 1) The procedure to reset the Service light on the Volvo C30 involves holding down the TRIP button located in the center of the instrument panel: while
How to reset the service in the Volvo C30?
Volvo C30 (2006-2013 / MK 1) In this tutorial we can see how to reset the service in the Volvo C30, an extremely simple and quick operation, to be carried out only after completi
How do you reset the Service light on the Volvo C30?
Volvo C30 (2006-2013 / MK 1) The operation of resetting the Service light on the Volvo C30 is carried out by holding down the TRIP button located in the central part of the instr

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos