Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the serpentine belt in the Volvo V70?

Model: Volvo V70 MK 3 - Years 2007-2016
Part: V-belt

In this tutorial we can see how to replace the serpentine belt in the Volvo V70, a simple operation but one that requires good manual skills. First of all, we lift the front right side of the vehicle, then we remove both the wheel and the inner cover of the wheel well. We then grab the belt tensioner with a long square key, loosen the tension and release the belt. Finally, we remove the tensioner itself with a 10mm key, completely remove the belt and position the replacement following the indicated pattern. At this point, all that remains is to reassemble everything following the reverse procedure.

Posted on 13 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the auxiliary belt in the Volvo V70?
How to replace the auxiliary belt in the Volvo V70?
Volvo V70 (2000-2007 / MK 2) In this tutorial, you can see how to replace the auxiliary belt in the Volvo V70, a very simple and quick operation. First, wait for the engine to co…
Guide to Replacing the Timing Belt on the Volvo V70
Guide to Replacing the Timing Belt on the Volvo V70
Volvo V70 (2000-2007 / MK 2) Let's briefly discover the instructions that will allow you to dismantle and replace the timing belt on the Volvo V70. First, open the bonnet and sta…
How and When to Replace the Timing Belt of the Volvo V70
How and When to Replace the Timing Belt of the Volvo V70
Volvo V70 (2007-2016 / MK 3) Today, we will discover useful information for removing and replacing the timing belt of the Volvo V70, as well as the V60; for this type of engine, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos