Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Volvo V70

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Timing belt

Let's briefly discover the instructions that will allow you to dismantle and replace the timing belt on the Volvo V70. First, open the bonnet and start by dismantling and removing the serpentine belt; then remove the timing cover and lift the vehicle, dismantling the front right wheel as shown in the video. At this point, remove the crankshaft pulley and take the necessary references for replacing the belt, installing the original one; then refit the alternator belt and the timing cover to complete the job!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Replace the Timing Belt of the Volvo V70
How and When to Replace the Timing Belt of the Volvo V70
Volvo V70 (2007-2016 / MK 3) Today, we will discover useful information for removing and replacing the timing belt of the Volvo V70, as well as the V60; for this type of engine, …
Replacement of the timing belt of the Volvo V70
Replacement of the timing belt of the Volvo V70
Volvo V70 (2000-2007 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the timing belt on the Volvo V70. To access the timing belt, it…
Replacing the Timing Belt on a Volvo V70 D3 (2012)
Replacing the Timing Belt on a Volvo V70 D3 (2012)
Volvo V70 (2007-2016 / MK 3) In this video, we will see the main steps to remove and replace the timing belt on a 2012 Volvo V70 D3. First, lift the vehicle at the front and remo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos