Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Volvo V70

Model: Volvo V70 MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Timing belt

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the timing belt on the Volvo V70. To access the timing belt, it is necessary first to remove the engine bars and the engine support by unscrewing all the fixing nuts; then we lift the car and remove the right front wheel, then remove the crankshaft pulley and disconnect the alternator belt, as shown in the video.

Now we remove the distribution cover to access it, replacing if necessary also the water pump kit, following the video tutorial until the end!


Posted on 29 July 2025 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Volvo V70
Guide to Replacing the Timing Belt on the Volvo V70
Volvo V70 (2000-2007 / MK 2) Let's briefly discover the instructions that will allow you to dismantle and replace the timing belt on the Volvo V70. First, open the bonnet and sta…
How and When to Replace the Timing Belt of the Volvo V70
How and When to Replace the Timing Belt of the Volvo V70
Volvo V70 (2007-2016 / MK 3) Today, we will discover useful information for removing and replacing the timing belt of the Volvo V70, as well as the V60; for this type of engine, …
How to Replace the Timing Belt on a Volvo V70
How to Replace the Timing Belt on a Volvo V70
Volvo V70 (2000-2007 / MK 2) To replace the timing belt on the Volvo V70, open the bonnet and remove the protective panel located on the left side of the engine block: you will n…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos