Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Volvo V70?

Model: Volvo V70 MK 3 - Years 2007-2016
Part: Timing belt

The procedure for replacing the timing belt on the Volvo V70 involves opening the hood and then removing the protective panel located on the left side of the engine block: first, the coolant reservoir and power steering oil reservoir must be removed. The right front wheel and fender must also be removed, allowing access to the belt tensioner pulley, which, once removed, will reduce the tension of the belt, allowing it to be removed from the respective gear wheels. This will allow for the installation of the new belt and the reinstallation of all other parts.

Posted on 22 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing belt of the Volvo V70?
How do you replace the timing belt of the Volvo V70?
Volvo V70 (2007-2016 / MK 3) The timing belt of the Volvo V70 can be replaced by opening the hood and removing the panel located on the left side of the engine block: it will be …
How and When to Replace the Timing Belt of the Volvo V70
How and When to Replace the Timing Belt of the Volvo V70
Volvo V70 (2007-2016 / MK 3) Today, we will discover useful information for removing and replacing the timing belt of the Volvo V70, as well as the V60; for this type of engine, …
Replacement of the timing belt of the Volvo V70
Replacement of the timing belt of the Volvo V70
Volvo V70 (2000-2007 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the timing belt on the Volvo V70. To access the timing belt, it…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos