Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and When to Replace the Timing Belt of the Volvo V70

Model: Volvo V70 MK 3 - Years 2007-2016
Part: Timing belt

Today, we will discover useful information for removing and replacing the timing belt of the Volvo V70, as well as the V60; for this type of engine, the timing belt should be replaced every 112,000 miles or ten years. Therefore, lift the vehicle and remove the front right wheel and the wheel arch; then remove the engine mount and take off the timing cover to access the belt, as shown in the video. Replace and install only the original belt, ensuring its long-lasting durability.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Volvo V70
Guide to Replacing the Timing Belt on the Volvo V70
Volvo V70 (2000-2007 / MK 2) Let's briefly discover the instructions that will allow you to dismantle and replace the timing belt on the Volvo V70. First, open the bonnet and sta…
Replacement of the timing belt of the Volvo V70
Replacement of the timing belt of the Volvo V70
Volvo V70 (2000-2007 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the timing belt on the Volvo V70. To access the timing belt, it…
How to Replace the Timing Belt on a Volvo V70
How to Replace the Timing Belt on a Volvo V70
Volvo V70 (2000-2007 / MK 2) To replace the timing belt on the Volvo V70, open the bonnet and remove the protective panel located on the left side of the engine block: you will n…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos