Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Mount Replacement

Model: Volvo S80 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine mount

See other generations:
Video tutorial

Loosen the nuts on the front wheel and lift the vehicle securely. Unscrew the bolts and remove the wheel.

Install a suitable support under the engine to prevent movement during the removal of the mount. Remove the plastic undertray and locate the faulty mount.

Begin by unscrewing the four nuts that secure the mount and the fixing nuts of the vibrostop using a ratchet and a spanner. Once the faulty part is removed, position the new replacement and screw in the bolts that were just removed.

For a more effective job, it is advisable to lubricate them before assembly.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacement of Brake Pads
Replacement of Brake Pads
Volvo S80 (1998-2006 / ) Loosen the wheel fastening bolts before lifting the vehicle, raise it with a jack, apply appropriate axle stands, and complete the wheel removal whil…
Replacement of Front Wheel Control Arm
Volvo S80 (1998-2006 / ) The necessary tools are a ratchet spanner, a puller, and the original replacement bushes. Lift the car on the ramp to access the underlying mechanics…
Replacement of Engine Coolant
Replacement of Engine Coolant
Volvo S80 (1998-2006 / ) In very cold regions, a good antifreeze is advisable; periodic replacement prevents possible radiator blockages. Locate the expansion tank and remove…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos