Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Brake Pads

Model: Volvo S80 - Years 1998-2006
Part: Brake pads

Loosen the wheel fastening bolts before lifting the vehicle, raise it with a jack, apply appropriate axle stands, and complete the wheel removal while checking the wear on the brake disc. Unscrew the fastening bolts of the brake caliper bracket located at the rear, and remove the bracket complete with caliper. Remove the old brake pads and use a C-clamp to retract the caliper piston. Insert the new brake pads and reposition the caliper with the bracket in its housing, tightening the respective fastening bolts. Repeat the same procedure on the rear wheels.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo S80 (1998-2006 / ) First, lift the car at the rear and remove the right rear wheel. Place the removed wheel under the axle and lower the jack to relieve tension on the …
Volvo S80 (1998-2006 / ) Having a blown bulb can be very inconvenient and costly, especially as it may lead to a fine from the authorities. Therefore, it is always wise to ca…
Volvo S80 (1998-2006 / ) The necessary tools are a ratchet spanner, a puller, and the original replacement bushes. Lift the car on the ramp to access the underlying mechanics…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos