Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Position Bulbs on a Volvo S80

Model: Volvo S80 MK 2 - Years 2006-2016
Part: Headlight bulb

Replacing the position lights on a Volvo S80 is really straightforward, a maintenance task suitable for everyone, even the less experienced. To do this, start by lifting the bonnet and securing it. Remove the rear cover of the affected position bulb by unscrewing it, as shown in the video. Pull the connector from its housing with the small bulb attached, then disconnect the bulb from the connector and insert the new one. Proceed in reverse by inserting the connector back into the headlamp and refitting the round cover. Check its functionality.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Position Light Bulbs in a Volvo S80?
How to Replace the Position Light Bulbs in a Volvo S80?
Volvo S80 (2006-2016 / MK 2) This tutorial shows how to replace the position light bulbs in a Volvo S80, a very simple operation. First, ensure the key is not inserted, then open…
How to reset the service light on the Volvo S80?
How to reset the service light on the Volvo S80?
Volvo S80 (1999-2006 / MK 1) Resetting the service in the Volvo S80, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, we must have co…
How to Reset the Service Light on the Volvo S80?
How to Reset the Service Light on the Volvo S80?
Volvo S80 (2006-2016 / MK 2) In this tutorial, you will see how to reset the service light on the Volvo S80, a very simple and quick operation to perform only after completing al…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos